RS 485 Isolator ISL 485
The ISL 485 isolator allows connecting various transmitters/receivers on the same RS 485 line while guaranteeing a 2500 v galvanic partition.
A polarisation and termination for the MODBUS or PROFIBUS DP network are ensured on each side of the RS 485 line, internal selection by jumpers.
ISL 485 devices have a DIN plug (accessible under the front face) for local access to the RS 485 line from a portable PC, using the standard PC/DIN cable of the range of converters.
RS485 LINK ISOLATOR
- RS485 isolation at 2500V – 50Hz – 1 min.
- Max. flow 1.5Mbits/sec.
- With integrated end of the line and polarization resistors
- For MODBUS and PROFIBUS networks
- Transmission and receipt witness lights
- For DIN rail mounting
- Format: 22,5 x 75 mm Depth: 120mm
DATASHEET (pdf) | MANUAL (pdf) |